2D Design Process

2D Design Process

The final deliverable: An artwork inspired by "platonic solid".
Hint: Arrange the two objects with different combinations and explore intriguing configurations.



In three-dimensional space, a Platonic solid is a regular, convex polyhedron. It is constructed by congruent (identical in shape and size), regular (all angles equal and all sides equal), polygonal faces with the same number of faces meeting at each vertex.  
Me and Sylvia researched about fancy shapes and patterns for a while and we came to an agreement about exploring the beauty of Geometry. We drew the graphics using Adboe illustrator (AI) and Sylvia designed the linear body figure on the cubic using lines that we believed will render out with good and intriguing visual effect. 
What we design and cut: A Cube and an Octahedron with an embedded circle on each side. 

The cutting Process: Initially we had an idea of printing it using transparent acrylic but the Thingspace at Macy ran out of it therefore we end up using MDF (Medium-density fiberboard).
Note: Medium-density fiberboard is a versatile building material. It’s cost-effective and good for use on shelving, storage cabinets, and decorative projects. It also has a smooth surface, which is perfect for painting.
Thanks to the previous laser cutter tutorial given by the fellow Alice, me and Sylvia proceeded to cut quickly.  

Our Operational notes:
1. Turn on Air pump/ BOFA Filtration System
2. Turn on Lasercutter
3. Place your material
4. Manual Focus
5. Settings
6. Send a file from computer.
Our Setting:
1. Deselect"Center-Engraving."
2. Job Types: 
Raster-Engraving 
Vector-Cutting
Combined-Engrave&Cut
3.Piece Size: Size of our art board (24 by 18 which is the original size of our MDF. )
4. Raster Setting: Speed and power (50% and 60%)
5.Vector Setting: Speed, Power, Frequency (8%, 100%,  approximately 600hz)
6. Print.
Power: How strongly the laser performs.
Speed: How fast or slow of the laser-cutting
Frequency: between 10 and 5000 pulses per inch (ppi) 
The number of laser pulses that are applied to the materials in every inch. 
Since we want to preserve the material as much as possible, we put all the shapes intensively on the AI canvas as you could see below.



The making Process: 
We used wires to attach all the pieces together through the holes that we designed in advance. 




Comments